E6000 Premium Clear mini 4 pack

This pack contains four handy 5g tubes of E6000 Premium Adhesive. Designed with an advanced formula featuring enhanced adhesion promoters, E6000 Premium delivers the strong, flexible bond you expect, with improved performance across a wide range of materials, including difficult plastics. The individual tubes are perfect for smaller projects, allowing you to use what you need while keeping the rest sealed and fresh for future use. Its flexible finish and durable hold make it ideal for fly tying. It remains flexible once cured and performs well in conditions where movement or vibration is present.

Directions for Use:

1. Keep the lid tightly sealed when not in use. Be sure to read all instructions before applying.
2. Ensure surfaces are clean, dry, and free from dust or grease. For best results, lightly roughen surfaces before application.
3. To open, puncture the tube seal using the point inside the cap.
4. Apply directly to the surfaces you wish to bond or repair. Ideal application temperature is between 10°C and 32°C. Once cured, the adhesive can tolerate intermittent temperatures ranging from -40°C to 82°C.
5. Allow at least 24 hours to cure. Depending on materials and conditions, full strength may take 48–72 hours.
6. To assist with future cap removal, apply a small amount of petroleum jelly to the tube threads before replacing the cap.
7. Clean uncured adhesive with acetone or a citrus-based solvent. Once cured, it can only be removed by cutting or scraping.